svg-arrow-next svg-arrow-prev

Zoom the image with the mouse

FT Guardian Gremlin v.2 Get Started Bundle

(1 review) Write a Review


FT Guardian Gremlin v.2 Get Started Bundle


The Gremlins are back and ready for any skill level and budget. The new FT Guardian Gremlin v.2 is a result of multiple attempts to capture the right experience for the beginner, but also give the experienced pilot something to play with around the house.

This new design will provide hours of fun when coupled with a good supply of batteries. Additionally, the characteristics of the Guardian v.2 feature an incredibly powerful, yet reliable, and very controllable aircraft. The best of all is that the design protects all of the moving parts and key components, making it safe and durable for inside or outside flying. Designed for STEM, it can also be enjoyed by everyone!

Dump File

The FT Guardian Gremlin v.2 Get Started Bundle  includes the following components:

  • Gremlin Guardian Delrin Frame Kit
    • Top Plate
    • Bottom Plate
    • Standoffs: Nylon Hex 20mm x 12
    • Fasteners: Nylon 6mm x 24 
    • Camera Mount
    • Battery Retention O-Ring
  • (4) FT Gremlin 1104 5400kV Brushless Motors
  • (1) GHF411 PRO-BMI 40A Toothpick F4 2-6S AIO Brushless Flight Controller
  • (1) XT-30 with 40mm leads
  • (1) HQ Durable Prop T2.5X2.5X3 (2CW+2CCW)-Poly Carbonate
  • (1) Caddx Ant AIO FPV Camera 16:9 Black
  • (1) RadioMaster Zorro 4-in-1 with Batteries
  • (1) RadioMaster R81 Satellite Receiver
  • (1) Beta FPV VR02 FPV Goggles
  • (1) Lipo Battery Pack With XT-30 Plug
  • (1) B3 Pro Compact Charger


  • Size: L – 147mm / W – 162mm / D – 30mm 
  • Weight: ~ 105g without Battery (~148g with 2s battery) - (~ 186g with 3S recommended battery)
  • Flight Controller – JHEMCU GHF411AIO-BMI 40A All-In-One
    • Mounting Pattern: 25.5mm x 25.5mm
    • Input Voltage: 2-6S (7.4V - 26V)
    • BEC: 5V / 2.5A & 10V / 2A
    • Gyro: BMI270
    • MCU: 100MHz STM32F411CEU
    • Receiver Compatibility: SBUS / IBUS / DSM2 / DSMX / TBS / ELRS
    • Blackbox: 8MB Memory
    • UARTs: 2
    • OSD: AT7456E
    • USB: Micro USB / USB-C (Add-On Board)
    • ESC Current: 40A x 4
    • ESC Firmware: BlHeli_S
    • ESC Protocols: PWM / OneShot42 / OneShot125 / MultiShot / DShot 150 / DShot 300 / DShot 600
    • TVS Protection: Yes (Add-On Board)
    • Size: 33mm x 33mm
    • Weight: 7.6g
  • Caddx Ant AIO FPV Camera
    • Image Sensor: 1/3” CMOS Sensor
    • Horizontal Resolution: 1200 TVL
    • System: NTSC
    • Image: 16:9
    • Lens: 2.1mm
    • FOV: 145°
    • Minimum Illumination: 0.01 Lux
    • Dimensions: 14mm x 16mm
    • Power Input: 3.3V – 6V
    • Frequency Band: 5.8GHz
    • Channels: 38
    • Transmitting Power: 25mW – 100mW
    • Weight: 3g
  • Motors – FT Gremlin 1104 5400Kv
    • Weight (Including Cables): 5g
    • Configuration: 9N12P
    • Shaft Diameter: 1.5mm
    • Voltage: 2-3S
    • Stator: 1104
    • Mounting Pattern: 9mm x 9mm
  • Recommended 2S Battery
    • Capacity: 650-800mAh
    • Voltage: 7.4
    • Discharge Rate: 45C
    • Max Burst Discharge Rate: 90C
    • Configuration: 2S1P
    • Net Weight: 43g
    • Size: 49mm x 24mm x 19mm
    • Discharge Plug: XT30
    • Balance Plug: JST-XH


  • Guardian Gremlin v2 is a great first multi rotor!

    Posted by Gavin Dillon on 16th Mar 2023

    The Guardian Gremlin is a fantastic first drone in my opinion! I am a commercial drone pilot that has only flown DJI products but I wanted to start building my own and exploring FPV cinematography and this was my first kit. The build was excellent, everything was great and straight to the point. The only thing that got me hung up was binding the T8 lite to the R81 but once all that got worked through it flew fantastic. The main thing I would suggest is just follow the directions to a T when building and you will be perfectly fine, overall, super happy and excited to keep flying.

Related Products

Customers Also Viewed