Electronic Accessories

Keep your batteries in place with these Flite Test battery Straps! These measure 9 inches in length and are .75 inches wide. These straps are ideal for 1000-2250mAh, 2s, 3s or 4s battery sizes. Quantity: 2

This Flite Test Servo Tester allows you to set up, test, and center up to 3 servos at once! With an input voltage of 4.5-6V, most BECs found on Flite Test & EMAX escs will be an ideal choice to power the tester. Lastly, this tester incorporates three...

Keep your batteries together and organized with the Flite Test Lipo Storage Bag!

Type a description for this product here...

Servo Y-Harnesses are used to allow you to run two servos off of the same channel of your radio receiver. Our Y-Harnesses feature gold plated connectors for maximum conductivity.This 12" long Y-Harness features Heavy Duty 22 gauge wire, and is fitted...

Not a fan of Soldering? Connect two ESC's to one battery with this JST Y-harness. This is an easy way to power both motors on a twin engine airplane with one battery.  This JST Connector is rated for our Mighty Mini twin engine airplanes such as the...

This is one 20cm Flite Test (7.8") universal servo extension lead. Female and male connectors features a JR style connector (without the tab). 

XT-30 Y Harness20cm long Includes 1 Y harness

Check your battery voltage at the field or in the shop.  Use it as an alarm when you fly, in case your timer doesn't work.      Connects to the female JST-XH balance leads on your battery  Plastic shell to protect the pins and...

60cm Servo Extension

This is a Flite Test XT60 Female to XT30 Male adapter. Used to convert an XT60 based ESC or Charge Cable to accept an XT30 based battery. 

Type a description for this product here...

20cm Flite Test (7.8") universal servo extension lead. Female connector accepts all servo connector styles (such as Futaba and JR), and male connector features a JR style connector (without the tab). 

This is a package of Flite Test 12" motor extensions, featuring 3.5mm bullet style connectors and assembled with 18AWG wire. 

The Flite Test XT60 Charge Squid Cable allows you to charge nearly any battery that is equipped with a JST, T-Style, XT30, XT60, or EC3 style connector. NOTE: You can only charge ONE BATTERY at a time with this charge cable. DO...

3.0mm Propeller Protector (prop saver)

Bullets used for the motor side of a motor to ESC connection. Includes 3 bullets and 3 heat shrink tubes. Works great with the 20A ESC included in Power Packs A and F.

This harness is perfect for charging lipo batteries with an XT-60 Plug. The 4mm bullet connectors are standard to all lipo Chargers that take plug in charge cables.

This product contains one male Xt-30 connector end and a one female Xt-30 connector end.  

This is the Flite Test 7 Amp Universal Battery Eliminator Circuit (UBEC). Rated for use with 2S up to 8S LiPo batteries the UBEC uses power from the battery you use to power your motor to provide 5.5VDC to operate your receiver, servos and FPV equipment...