FT Guardian Gremlin v.2 Get Started Bundle
- UPC:
- FT5119031502
Kickstart your drone journey with the FT Guardian Gremlin v.2 Get Started Bundle. Elevate your flying skills!
FT Guardian Gremlin v.2 Get Started Bundle
Specifications
- Size: L: 147mm / W: 162mm / D: 30mm
- Weight: ~ 105g without Battery (~148g with 2s battery) - (~ 186g with 3S recommended battery)
- Flight Controller: JHEMCU GHF411AIO-BMI 40A All-In-One
- Size: L: 147mm / W: 162mm / D: 30mm
- Weight: ~ 105g without Battery (~148g with 2s battery) - (~ 186g with 3S recommended battery)
- Mounting Pattern: 25.5mm x 25.5mm
- Input Voltage: 2-6S (7.4V - 26V)
- BEC: 5V / 2.5A & 10V / 2A
- Gyro: BMI270
- MCU: 100MHz STM32F411CEU
- Receiver Compatibility: SBUS / IBUS / DSM2 / DSMX / TBS / ELRS
- Blackbox: 8MB Memory
- UARTs: 2
- OSD: AT7456E
- USB: Micro USB / USB-C (Add-On Board)
- ESC Current: 40A x 4
- ESC Firmware: BlHeli_S
- ESC Protocols: PWM / OneShot42 / OneShot125 / MultiShot / DShot 150 / DShot 300 / DShot 600
- TVS Protection: Yes (Add-On Board)
- Size: 33mm x 33mm
- Weight: 7.6g
FT Gremlin 1104 5400kv
- Weight (Including Cables): 5g
- Configuration: 9N12P
- Shaft Diameter: 1.5mm
- Voltage: 2-3S
- Stator: 1104
- Mounting Pattern: 9mm x 9mm
- Image Sensor: 1/3 CMOS Sensor
- Horizontal Resolution: 1200 TVL
- System: NTSC
- Image: 16:9
- Lens: 2.1mm
- FOV: 145?ø
- Minimum Illumination: 0.01 Lux
- Dimensions: 14mm x 16mm
- Power Input: 3.3V -?? 6V
- Frequency Band: 5.8GHz
- Channels: 38
- Transmitting Power: 25mW 100mW
- Weight: 3g
Recommended Electronics
Battery:- Capacity: 650-800mAh
- Voltage: 7.4
- Discharge Rate: 45C
- Max Burst Discharge Rate: 90C
- Configuration: 2S1P Net
- Weight: 43g Size: 49mm x 24mm x 19mm
- Discharge Plug: XT30
- Balance Plug: JST-XH
-
Guardian Gremlin v2 is a great first multi rotor!
The Guardian Gremlin is a fantastic first drone in my opinion! I am a commercial drone pilot that has only flown DJI products but I wanted to start building my own and exploring FPV cinematography and this was my first kit. The build was excellent, everything was great and straight to the point. The only thing that got me hung up was binding the T8 lite to the R81 but once all that got worked through it flew fantastic. The main thing I would suggest is just follow the directions to a T when building and you will be perfectly fine, overall, super happy and excited to keep flying.