null
svg-arrow-next svg-arrow-prev
×

video gallery
Zoom the image with the mouse

FT Mighty Mini Zero MKR2

(1 review) Write a Review
C$40.65

RC Airplane Build Kit

Build and fly an FT Mighty Mini Zero RC plane featuring a classic warbird design, wide speed range, and Power Pack F V.2 or F Se adaptable.

FT Mighty Mini Zero MKR2

C$40.65

FT Mighty Mini Zero MKR2

C$40.65
Flying Space Required
medium_field
Park
Build Level
medium
Medium
Flying Level
medium
Medium
Build Time
very-slow
4 Hr
Flying Speed
very-slow
Fast
Battery Capacity
battery
850 mAh
Battery Cells
battery
3-Cell
Power Pack
F
Min. Channels
battery
3-Channels
Series
Mighty Minis

The FT Mighty Mini Zero brings all the rewards of flying a classic warbird and packs it into a small package that is both fun to build and fly. The Mighty Series aircraft designs are known for being fun to build, incredibly durable, and to also fly amazing. The Mini Zero is no exception. While not a trainer, you will be able to carve through the sky and perform all the classic maneuvers you would expect a warbird to do. Along with that, The wide speed range will make hand launching and landing a breeze. With this build, you will also learn new techniques that are responsible for the amazing scale lines of the Mini Zero and also benefit with the large open room for both the battery or an optional FT Aura 5 flight control board.

Once your build is finished, scuff the foam, paint, and add the included decals of an amazing scale and personalized look. This model can be flown with a Power Pack F V.2. Couple this amazing model with our Mighty Mini Corsair for an epic aerial battle with your friends and family.

-----
Are you just starting out in Radio Controlled Planes? No problem. We got you covered! We're a community that loves sharing our passion for flight and we've got the knowledge to guide you every step of the way. So why not jump right in? Visit our Beginner Section & let's start this journey together.

FT Mighty Mini Zero MKR2 Specifications

  • Weight Without Battery: 230 grams
  • Wingspan: 30" (762 mm)
  • Center of Gravity: 1.5" (39mm) from the leading edge of wing (Recommended)
  • Control Surface Throws: 12 degree deflection 30% expo

Package Includes

  • 2) Lasercut Maker Foam Sheet
  • 1) Mini Premium Hardware Pack: which includes (4) Vinyl Mini Control Horn, (2) Vinyl/Fiberglass Mini Firewall, (4) Rubber Band, (2) Zip Tie, (1) Velcro, (1) Paint Stir, (3) BBQ Skewer, (2) Popsicle Stick, (2) Control Rod Housing, (3) 16" Pushrod, (2) Thin Landing Gear Wire
  • 1) Mini Zero Sticker Sheet

FT Mighty Mini Zero MKR2 Videos

  • Awesome plane!
    5

    Posted by Jon on 16th Feb 2023

    Just finished building the Mini Zero with the new Maker 2 foam board. It turned out great! Definitely a better design than the Mini Mustang I built a few months ago. Thank you John Overstreet! The build was enjoyable, and I found it easy to follow along with Josh's video. And the decal sheet that comes with the quick-build kit is a nice addition. I did note two exceptions during the build, though. For the aileron servos, Josh recommends using the heavier 4-prong servo arm and trimming off 3 of the prongs. None of the servos in the "F" powerpack that I bought included the 4-prong version. However, there was a 2-prong version that is heavy enough. Also, routing the servo wires through the guide tubes in the rear fuselage (exactly as marked on the foam board and shown in the video) put way too much bend in the wires. I'm confident the rudder and elevator servos would not have handled that much resistance for long. Ultimately, I cut open the belly and removed the guide tubes. Now the wires run through the holes in the fuselage former and straight out through the back of the fuselage -- no more binding. All painted and ready to maiden as soon as I get a calm, dry day.

Related Products