Canadian Dollar
FT Versa Wing MKR2
RC Airplane Build Kit
The FT Versa Wing is a versatile RC plane that excels in combat, FPV, and as a delta trainer. Opt for tractor or pusher configurations with swappable power. Engineered for diverse flying experiences.
FT Versa Wing MKR2
The FT Versa Wing is an all around performer that will meet the needs of almost any pilot. Whether it's combat, FPV, or even a delta winged trainer with gentle stall characteristics, the FT Versa Wing does it all with ease. Use a swappable power pod to fly in a tractor configuration (propeller at the front of the wing), or install the optional FT Elements Simple Firewall to operate the FT Versa Wing in a pusher configuration (propeller mounted on the back of the wing). This airframe is compatible with the Swappable Series developed by Josh Bixler.
Are you just starting out in Radio Controlled Planes? No problem. We got you covered! We're a community that loves sharing our passion for flight and we've got the knowledge to guide you every step of the way. So why not jump right in? Visit our Beginner Section & let's start this journey together.
FT Versa Wing MKR2 Specifications
- Weight Without Battery: 10.6 oz (300 g)
- Center of Gravity: 7" (178 mm) from the nose of the wing
- Control Surface Throws: 12 deflection 30% expo
- Wingspan: 38" (965 mm)
NOTE: Simple Element Firewall is sold separately for PUSHER configurations! This includes the airframe only (no electronics).
NOTE: Electronics Pack C is to ONLY be used in the swappable tractor configuration. To use these electronics in a pusher configuration, you will need a smaller prop.
Recommended Electronics
- Motor: 29 g, 1300kv minimum
- Prop: 8 x 6 (pusher) 9 x 4.7 (tractor)
- ESC: 10 - 30 amp (depending on motor)
- Battery: 1300-2200mAh 3S or 4S
- Servos: (2) 9 gram servos
Package Includes
Note: Kit includes airframe only- 3) Lasercut Maker Foam Sheet
- 1) Simple Premium Hardware Pack: which includes (4) Vinyl Control Horn, (1) Vinyl/Fiberglass Firewall, (5) Rubber Band, (4) Zip Tie, (1) Velcro, (1) Paint Stir, (4) BBQ Skewer, (6) Popsicle Stick, (1) Control Rod Housing, (4) 23" Pushrod, (2) Medium Landing Gear Wire, (1) Thin Landing Gear Wire
FT Versa Wing MKR2 Videos
Related Products
FT Tutor Turbo Wing Kit MKR2
Its time to expand this iconic airframe to now be offered in our patented FT Maker Foam v.2 as the FT Tutor MKR2. The FT Tutor was designed to be a training aircraft modeled after classic trainers,...
FT Tenet Flite MKR2 - Wings and Tails Kit
FT Tenet Flite MKR2 Wings and Tails Kit give you all you need to learn about the exciting world of flight through coupling them with the FT Tenet v.2 Duo or FT Tenet 3D fuselages. ...
FT Bushwacker MKR2
Say hello to Peter's 3rd FT design, the FT Bushwacker! This rugged little plane is based off of multiple popular full scale bush planes such as the Highlander! The FT Bushwacker is an aerobatic...
FT Tutor MKR2
It's time to expand this iconic airframe to now be offered in our patented FT Maker Foam v.2 as the FT Tutor MKR2. The FT Tutor was designed to be a training aircraft modeled after classic...
FT Explorer MKR2
The FT Explorer carries all the simple lines, features, and characteristics that you will find with many of the most common and successful trainers such as the Hitec Easy Star, the Sky Surfer, and...
FT Goblin MKR2
The FT Goblin was born from a collaboration between FLITE TEST and ReadyMade RC to create a foamboard version of their STRIX Goblin, a high-performance FPV plank. This plane fills the gap between...