US Dollar
FT Super Bee MKR2
RC Airplane Build Kit
FT Super Bee MKR2
FT SUPER BEE!! A FT community series build thanks to Dan and Keegan Sponholz! Based on a mash-up of on Dan's other builds, the FT Bloody Baron, as well as the FT Mini Cruiser THIS little BEE is a supped up mini with tons of speed and power! This little guy can reach speeds upwards to 90-100 MPH! Now, THATS FAST! With the DUAL engine setup, this allows for you to use the differential thrust option for your yaw control so the control on this plane is super tight! It also comes with an extra piece of plywood for added strength in the nose so it is even more durable then ever!! Grab a friend and don't forget your bee suit, because this Super Bee is ready for some high flying action! LETS FLY!
-----
Are you just starting out in Radio Controlled Planes? No problem. We got you covered! We're a community that loves sharing our passion for flight and we've got the knowledge to guide you every step of the way. So why not jump right in? Visit our Beginner Section & let's start this journey together.
-----
Specifications:
- Weight without Battery: 12 oz (340 g)
- Center of Gravity: 2 inches (50 mm) From the leading edge of the wing
- Control Surface Throws: 12 degree deflection (ailerons/elevator) Expo 30%
- Wingspan: 25 inches (635 mm)
Recommended Electronics:
- Motor: 2300kv 2204 size motor
- Prop: 5x4.5 3 blade prop
- ESC: 12 amp minimum
- Battery: 850mAh 3S
- Servos: (3) 5 gram servos
Package Includes:
- 2) Lasercut Maker Foam Sheet
- 4) 16.5" Pushrod
- 2) BBQ Skewer
- 1) 4pk of full size control horns to be placed on top of nose reinforcement
- 1) 3/32" plywood nose reinforcement
- 1) Velcro
-----
Build
*Please watch recent build videos before removing any paper from the foam!*
-
Super Bee
Extremely nimble and potentially a double handful to fly. Added a flight stabilization board (A3 Lite) and transformed it into a high alpha almost front yard flyer.
Related Products
FT Super Bee Hardwood Replacement Kit
The FT Super Bee Hardwood Replacement Kit is a pivotal component for any serious RC plane builder. With precision-cut plywood nose, dual firewalls, and four control horns, it provides an impeccable...
FT Flerken MKR2
Its time to expand this iconic airframe to now be offered in our patented FT Maker Foam v.2 as the FT Flerken MKR2. The FT Flerken MKR2 is a combination of the true celebration of form and function...
FT Simple Soarer MKR2
The FT Simple Soarer is a great introduction to 2-channel gliding. Whether you are motoring up to altitude by using a Power Pod or towing the Simple Soarer up with a friend by using the FT Elements...
FT A-10 Warthog MKR2
The Flite Test A-10 Warthog is one of the largest and most complete Flite Test kits available. This kit includes all of the lasers cut components, including the firewalls, hardware, pushrods, duct...