FT Mighty Mini Sportster MKR2
RC Airplane Build Kit
The FT Mighty Mini Sportster is a smaller, more agile, verison of the larger swappable Sportster. It is a basic 4 channel plane that is capable of most Sport aerobatic maneuvers.
FT Mighty Mini Sportster MKR2
The Mini Sportster is a smaller more agile version of the larger Swappable Sportster. It is a basic 4-channel plane that is capable of most sport aerobatic maneuvers. Couple this airframe with our Power Pack F for recommended performance.
-----
Are you just starting out in Radio Controlled Planes? No problem. We got you covered! We're a community that loves sharing our passion for flight and we've got the knowledge to guide you every step of the way. So why not jump right in? Visit our Beginner Section & let's start this journey together.
FT Mighty Mini Sportster MKR2 Specifications
- Weight Without Battery: 7.2 oz (204 g)
- Center of Gravity: 1.75" (44.45 mm) from leading edge of wing
- Control Surface Throws: 12° - 16° deflection (elevator/aileron/rudder) Expo 30%
- Wingspan: 23" (584 mm)
Recommended Electronics
- Motor: 2200kv 2204 size motor
- Prop: 6 x 3 prop minimum
- ESC: 12 amp minimum
- Battery: 850mAh 3S
- Servos: (4) 5 gram servos
Package Includes
NOTE: This kit includes the airframe only- 2) Lasercut Maker Foam Sheet
- 1) Mini Premium Hardware Pack: which includes (4) Vinyl Mini Control Horn, (2) Vinyl/Fiberglass Mini Firewall, (4) Rubber Band, (2) Zip Tie, (1) Velcro, (1) Paint Stir, (3) BBQ Skewer, (2) Popsicle Stick, (2) Control Rod Housing, (3) 16" Pushrod, (2) Thin Landing Gear Wire
FT Mighty Mini Sportster MKR2 Videos
*PLEASE WATCH RECENT BUILD VIDEOS BEFORE REMOVING ANY PAPER FROM THE FOAM! SOME VIDEOS MAY USE WHITE FOAM BOARD, WHICH IS NO LONGER AVAILABLE AND HAS NOW BEEN REPLACED WITH WATER-RESISTANT FOAM BOARD.*
-
sportster
had fun building and flying used a
motor that was to big (F pack) flew
wonderful to much speed for my skill.
survived many crashes before it
became unfixable(pilot error)