FT Mighty Mini Sparrow MKR2
Small Scale and Beginner-Friendly Glider or RC Airplane Build Kit
Discover the versatile and educational FT Mighty Mini Sparrow RC plane. Build as a free-flight glider or a 3-channel RC platform in under 45 minutes!
FT Mighty Mini Sparrow MKR2
Look there in the sky!!... It's a BIRD ... It's a PLANE... It's.... THE FT MIGHTY MINI SPARROW!!
The FT Mighty Mini Sparrow is a fun bird with many personalities. The FT Mighty Mini Sparrow was designed to teach the builder all the basic techniques to build all of our foam board fleet. This means every technique from A folds to fold over wings will no longer be a mystery or a source of intimidation. The Mini Sparrow can be built as a free flight glider, or a fun 3-channel RC platform. As a free flight, The Mini Sparrow can be built without the use of a razor blade. This makes it a great option for educational environments and for younger pilots to build and fly. This whole build can be accomplished in under 45 minutes. Adding controls to the FT Mighty Mini Sparrow can easily be done making this little bird go from a free flight to a speedy little 3 channel. Fully capable of being flown with FPV gear, The Mini Sparrow provides an unobstructed view because of its rear mounted motor. Our hope is that this fun little design will be a useful source of both fun and education. Be sure to check out ftstem.com for more information on our educational solutions.
-----
Are you just starting out in Radio Controlled Planes? No problem. We got you covered! We're a community that loves sharing our passion for flight and we've got the knowledge to guide you every step of the way. So why not jump right in? Visit our Beginner Section & let's start this journey together.
FT Mighty Mini Sparrow MKR2 Specifications
- Center of Gravity: 2.75" (69mm) from leading edge of wing
- Weight Without Battery: 6.5oz (187g)
- Control Surface Throws: 12 degree deflection (elevons) Expo 30%
- Wingspan: 28.5" (723mm)
Recommended Electronics
- Motor: 2300Kv 1806 size motor
- Prop: 5 x 3 - 6 x 3 prop
- ESC: 12 amp minimum
- Battery: 800mAH 3s minimum
- Servos: (2) 5 gram servos
Package Includes
Note: Kit includes airframe only
- 2) Lasercut Maker Foam Sheet
- 2) Mini Firewall/Control Horn Combo
- 1) Velcro
- 3) BBQ Skewer
- 2) Popsicle Stick
- 4) Coffee Stir
- 4) Rubber Band
- 2) Zip Tie
- 2) Thin Landing Gear Wire
- 1) 16" Pushrod Wire
FT Mighty Mini Sparrow MKR2 Videos
*PLEASE WATCH RECENT BUILD VIDEOS BEFORE REMOVING ANY PAPER FROM THE FOAM!*