Canadian Dollar
TX16S Mark II Radio Controller (M2) with Batteries
Empower your RC plane maneuvers with the TX16S Mark II Radio Controller (M2) - now enhanced with batteries. A seamless integration of control and power.
TX16S Mark II Radio Controller (M2) with Batteries
Empower your RC plane maneuvers with the TX16S Mark II (M2) - now enhanced with batteries. A seamless integration of control and power. Stay connected for RadioMaster's emerging technical marvels and visuals.
EdgeTX is installed by default (Touch screen enabled).
* Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.
Features
- Improved internal circuitry and optimized power supply.
- New charge circuitry with integrated reverse-polarity protection.
- Optimized charge IC now allows up to 2.2A internal USB-C charge current.
- Rear-mounted audio jack provided headphone output.
- V4.0 Gimbal improved centering and temperature stability (Same circuitry as AG01).
- Optional high/low rear grips are included for improved ergonomics.
- Improved S1/S2 knobs with clear centre-detents.
- Improved LS/RS Sliders with smoother feel and better centre-detents.
- Redesigned battery cover for improved battery access.
- Retooled body shell with improved fit and finish.
- Trainer socket changed to standard TRS 3.5mm socket.
- Rear DIY Socket added for personalized mods.
- Improved internal plastics for better longevity.
Specifications
- Item: TX16S Mark II
- Size: 287x129x184mm
- Weight: 750g (without battery)
- Transmission frequency: 2.400GHz-2.480GHz
- Transmitter module: Internal 4-in-1 multi-protocol module (CC2500 CYRF6936 A7105 NRF2401)
- Transmitting power: Internal 4-in-1 multi-protocol module : Max 100mw (protocol dependent)
- Antenna gain: 2db (transmit power adjustable)
- Working current: 400mA
- Working voltage: 6.6-8.4v DC
- Remote control distance:> 2km @ 22dbm
- Radio firmware: EdgeTX
- Module Firmware: Multiprotocol- Module (4IN1)
- Supported Protocols: Click here
- Channels: Up to 16 channels (depending on the receiver)
- Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272
- Gimbal: Option 1: V4.0 Hall sensor with Aluminium fascia; Option 2: AG01 CNC Hall sensor
- Module Bay: JR compatible module bay
- Upgrade method: Supports USB-C online / SD card offline upgrade
Package Includes
- (1) TX16S Mark II Radio Controller
- (1) 18650 Tray
- (1) USB-C Cable
- (1) Screen Protector
- (1) pair of flat grips
- (1) pair of raised grips (installed on radio by default)
- (1) TX16S Key Chain
- (2) 18650 2850mAh Batteries
-
Is not ExpressLRS capable OTB
5 stars though because its a great TX. FT doesn’t bother to tell you that you need an external module in order to run their new radiomaster ELRS receivers.
Related Products
TX16S Mark II Radio Controller (M2)
Harness advanced technology with the TX16S Mark II (M2) Radio Controller. Precision designed for RC plane enthusiasts. Expect groundbreaking updates from RadioMaster's ongoing innovation journey. If...
900mah 3.7v Li-ion 18350 Cells for Zorro Radio Controller (2pcs)
Extended flight time Precision and reliability for Zorro Radio Controller. Specifications Capacity: 900mAh Voltage: 3.7V Cell Type: 18350
RadioMaster Zorro 4-in-1 with Batteries
The RadioMaster Zorro, like the TX16S, is a multiprotocol compatible radio. We use our multiprotocol RadioMaster transmitters with receivers built by RadioMaster, FRSky and Spektrum and have had...
TW 270mAh 1s Battery
Tattu 270mAh 3.8V 75C 1S1P Lipo Battery Pack with JST-PHR 2.0 plug is best battery choice for micro quads. This lipo comes with 75c discharge rate, enough power, high burst, makes...
Battery Checker/Alarm (1-8S)
Check your battery voltage at the field or in the shop. Use it as an alarm when you fly, in case your timer doesn't work. Connects to the female JST-XH balance leads on your battery Plastic shell to...
Tiny Whoop 1S Battery Charger
Charge up to six 1s Whoop batteries at a time from any USB