Canadian Dollar
FT Simple Stick MKR2 (1067 mm)
RC Airplane Build Kit
The FT Simple Stick is an aerobatic RC plane now offered in our patented Maker Foam V.2. Perfect for sport flying or aerobatics.
FT Simple Stick MKR2 (1067 mm)
Elevate a timeless classic with the FT Simple Stick MKR2—now upgraded in our patented FT Maker Foam v.2 for lighter weight, easier building, and even better durability!
For years, the FT Simple Stick has been a go-to favorite for pilots and builders of every skill level, faithfully inspired by the legendary Stick series that’s defined model aviation for decades. Its straightforward design, symmetrical airfoil, and massive control surfaces deliver the perfect balance: razor-sharp precision aerobatics one moment, mind-bending 3D maneuvers the next.
Whether you're carving crisp loops and rolls, hovering in harriers, or just enjoying relaxed sport flying, the Simple Stick MKR2 responds with confidence and forgiveness that grows with you. Quick to assemble, tough enough for rough landings, and endlessly fun—it's the ultimate all-rounder that belongs in every pilot's fleet.
FT Simple Stick MKR2 Specifications
- Wingspan: 42" (1067mm)
- Weight Without Battery: 1.0 lbs (450 g)
- Center Of Gravity: 2.25" (58 mm) from leading edge of wing
- Control Surface Throws: 16 throw (ailerons/elevator/rudder) Expo 30%
Needed To Complete
- Transmitter: Minimum 4 Channel
- Receiver: Minimum 4 Channel
- Battery: 1300mah -1800mah 3S or 4S
- Power Pack: Flite Test Power Pack B V.2
Package Includes
NOTE: Kit includes the airframe only- 4) Lasercut Maker Foam Sheet
- 1) Simple Premium Hardware Pack: which includes (4) Vinyl Control Horn, (1) Vinyl/Fiberglass Firewall, (5) Rubber Band, (4) Zip Tie, (1) Velcro, (1) Paint Stir, (4) BBQ Skewer, (6) Popsicle Stick, (1) Control Rod Housing, (4) 23" Pushrod, (2) Medium Landing Gear Wire, (1) Thin Landing Gear Wire
FT Simple Stick MKR2 Videos
-
Much Needed Kit In Today's Market
The Simple Stick kit was easy to build, and it flew very well. Josh's video instructions were excellent. This was a refreshing experience compared to the difficult to build Chinese kits that came with little or no instructions.
I left off the power pod and epoxied a full-sized firewall to the nose for my 3530 motor. Be aware that epoxy does not adhere very well to the paper of the Maker Foam. I made a floorboard to accommodate my 2200mAh 3S lipo above and my ESC below.
Thank You, FliteTest.
-
A wonderful plane
I have built a great many planes over the last 50 years and this Simple Stick with the new Makers foam is clearly the best. I have built over 20 of these planes and give them to others. Fun to build, well designed, and fly's great with a power pack "B. Ordering six more."
-
Great Beginner Plane
I forgot to says that it flies a little different with the symmetrical airfoils. It was very smooth and not as "floaty" as many beginner planes. I used a C Power Pack with 2200 3S battery. Spectrum Safe Receiver with forward programing. I think my kids will love this one. This is a step up in size from the Tiny Trainer.
Related Products
FT Simple Scout MKR2
Step into the golden age of aviation with the FT Simple Scout—your perfect gateway to the thrill of RC flying, wrapped in the timeless charm of a classic WWI reconnaissance plane! Inspired by the...
FT Simple Storch MKR2
Unwind and soar with the FT Simple Storch—a relaxing, ultra-versatile park flyer that captures the legendary STOL magic of the full-scale Fieseler Storch! This 4-channel beauty offers a massive...
FT Simple Cub MKR2
Thank you for choosing the FT Simple Cub as your next Flite Test project!At Flite Test, our passion is introducing as many people as possible to the joy of flight—and making that journey fun,...
FT Simple Soarer MKR2
The FT Simple Soarer is a perfect introduction to 2-channel gliding. Whether you’re using a
FT Simple Waco Glider MKR2
The FT Simple Waco Glider is as easy to build as it is to fly. Designed for versatility, it can be flown using rudder and elevator or rudder, elevator, and ailerons, making it pe