null
svg-arrow-next svg-arrow-prev
×

video gallery
Zoom the image with the mouse

FT Guardian Gremlin v.2

(7 reviews) Write a Review
C$219.19

UPC:
FT4157123241

The Guardian Gremlin v.2 is an incredibly powerful, yet reliable, and very controllable FPV drone. Safe for inside or outside flying. STEM-approved fun!

FT Guardian Gremlin v.2

C$219.19

FT Guardian Gremlin v.2

C$219.19

The Gremlins are back and ready for any skill level and budget. The new FT Guardian Gremlin v.2 is a result of multiple attempts to capture the right experience for the beginner, but also give the experienced pilot something to play with around the house.

This new design will provide hours of fun when coupled with a good supply of batteries. Additionally, the characteristics of the Guardian v.2 feature an incredibly powerful, yet reliable, and very controllable aircraft. The best of all is that the design protects all of the moving parts and key components, making it safe and durable for inside or outside flying. Designed for STEM, it can also be enjoyed by everyone!

DUMP FILE

The FT Guardian Gremlin Specifications

  • Size: L:147mm / W:162mm / D:30mm
  • Weight: ~ 105g without Battery (~148g with 2s battery) - (~ 186g with 3S recommended battery)
  • Gremlin Guardian Delrin Frame Kit
    • Top Plate
    • Bottom Plate
    • Standoffs: Nylon Hex 20mm x 12
    • Fasteners: Nylon 6mm x 24?ÿ
    • Camera Mount
    • Battery Retention O-Ring
  • Size: L:147mm / W:162mm / D:30mm
  • Weight: ~ 105g without Battery (~148g with 2s battery) - (~ 186g with 3S recommended battery)
  • Flight Controller: JHEMCU GHF411AIO-BMI 40A All-In-One
  • Mounting Pattern: 25.5mm x 25.5mm
  • Input Voltage: 2-6S (7.4V - 26V)
  • BEC: 5V / 2.5A & 10V / 2A
  • Gyro: BMI270
  • MCU: 100MHz STM32F411CEU
  • Receiver Compatibility: SBUS / IBUS / DSM2 / DSMX / TBS / ELRS
  • Blackbox: 8MB Memory
  • UARTs: 2
  • OSD: AT7456E
  • USB: Micro USB / USB-C (Add-On Board)
  • ESC Current: 40A x 4
  • ESC Firmware: BlHeli_S
  • ESC Protocols: PWM / OneShot42 / OneShot125 / MultiShot / DShot 150 / DShot 300 / DShot 600
  • TVS Protection: Yes (Add-On Board)
  • Size: 33mm x 33mm
  • Weight: 7.6g
Motors: FT Gremlin 1104 5400kv
  • Weight (Including Cables): 5g
  • Configuration: 9N12P
  • Shaft Diameter: 1.5mm
  • Voltage: 2-3S
  • Stator: 1104
  • Mounting Pattern: 9mm x 9mm
Camera: Caddx Ant AIO FPV Camera
  • Image Sensor: 1/3 CMOS Sensor
  • Horizontal Resolution: 1200 TVL
  • System: NTSC
  • Image: 16:9
  • Lens: 2.1mm
  • FOV: 145?ø
  • Minimum Illumination: 0.01 Lux
  • Dimensions: 14mm x 16mm
  • Power Input: 3.3V 6V
  • Frequency Band: 5.8GHz
  • Channels: 38
  • Transmitting Power: 25mW 100mW
  • Weight: 3g
Recommended 2S Battery
  • Capacity: 650-800mAh
  • Voltage: 7.4
  • Discharge Rate: 45C
  • Max Burst Discharge Rate: 90C
  • Configuration: 2S1P
  • Net Weight: 43g
  • Size: 49mm x 24mm x 19mm
  • Discharge Plug: XT30
  • Balance Plug: JST-XH

The FT Guardian Gremlin v.2 Get Started Bundle?ÿincludes the following components:

  • (4) FT Gremlin 1104 5400kV Brushless Motors
  • (1)?ÿGHF411 PRO-BMI 40A Toothpick F4 2-6S AIO Brushless Flight Controller
  • (1) XT-30 with 40mm leads
  • (1)?ÿHQ Durable Prop T2.5X2.5X3 (2CW+2CCW)-Polycarbonate
  • (1) Caddx Ant AIO FPV Camera 16:9 Black
  • (1)?ÿRadioMaster Zorro 4-in-1 with Batteries
  • (1)?ÿRadioMaster R81 Satellite Receiver
  • (1)?ÿBeta FPV VR02 FPV Goggles
  • (1) Lipo Battery Pack With XT-30 Plug
  • (1)?ÿB3 Pro Compact Charger

The FT Guardian Gremlin Videos

  • Great Beginner Quadcopter
    5

    Posted by Turibius Rozario on 27th Aug 2023

    I've had this for a couple of months now, and so far this has been great. However, keep a few things in mind. Firstly, this is not carbon fiber and will break if you crash from a great height. I recommend being careful when inserting the camera into its mount, since it was a tight fit for me. I also recommend orienting the nylon standoffs so that there is more clearance for the motors (and also make sure to tuck in the motor wires!). I managed to do flips on a 2S 800 mAh battery. This drone can carry an action camera, but will be VERY sluggish (I recommend using a 3S battery in that case). Flight time is around 1 minute and 30 seconds on full throttle (2S 800 mAh). I had to change a few values in the PID setting since I had a lot of jitter on mine. If you want to solder the capacitor that it comes with, keep in mind that the capacitor takes a lot of space. Other than all these, I found the quad to be a great flight experience. Despite my crashes, this has survived pretty well, and I managed to find some replacements for some components (such as the propellers). It's amazing how this managed to handle wind outdoors and even could carry a heavy action camera on a 2S battery. As a beginner quad, I highly recommend this.

  • A great backyard flyer!
    5

    Posted by Dan Steeby on 27th Jan 2023

    I picked up a Guardian Gremlin and a Tiny Whoop at the same time, and the Gremlin has been a real blast outdoors. I'm not deft enough to fly it well indoors, but that may come with some more practice. The Gremlin is very sturdy and has taken some colossal crashes very well. The worst damage thus far is some minor scuffing on the body and a few popped nylon screws, which are easy and cheap to replace. I've barely played with the camera yet, but it works well and provides a clear signal, and I'm looking forward to using it soon.

  • Update
    5

    Posted by Dylan Beaudette on 1st Nov 2022

    This is an update to a previous review. Our gremlin is now flying after reversing the flight controller orientation in Betaflight. We had not previously considered this fix as the flight controller was installed according to video instructions and arrow on the printed circuit board.

    It is now our absolute favorite quad to fly, and we can't seem to keep batteries charged fast enough to fly it as much as we would like it. Thanks FliteTest!

Related Products