Canadian Dollar
FT Bravo MKR2
STEM RC Airplane Build Kit - Swappable Wings with FT Alpha and FT Charlie Kits
FT Bravo MKR2
The FT Bravo was designed and created by FT STEM students to showcase the Engineering and Design Learning Strand of our curriculum, Click here for more info. Proceeds of this project along with all the STEM Series aircraft will go towards supporting schools take flight using FT STEM.
The FT Bravo was designed to be a quick and challenging to fly build, this is the fastest and most agile plane of the Triad series. The FT Bravo is compatible with the FT Alpha and FT Charlie kits. Each airplanes’ wings are built to be removable from the fuselage, and can be swapped with any of the other Triad planes, giving the builder essentially 9 planes to choose from.
The swapping of wings takes less than a minute and is supported by rubber bands!
There is no need to re-calibrate the center of gravity on the aircraft after swapping, the CG remains the same no matter what combination you configure. This is great for the flight line and swapping with others, making it an enjoyable experience for all.
We want you to have an amazing experience both in building and flying. This kit comes with everything you need to complete the FT Bravo Aircraft. Push-rods, control horns, firewalls and all other items needed to make this airframe electronics ready are included in the kit. If you choose to purchase our Power Pack F V.2 and a battery, balance, flight performance and assembly will be quick and easy.
-----
Are you just starting out in Radio Controlled Planes? No problem. We got you covered! We're a community that loves sharing our passion for flight and we've got the knowledge to guide you every step of the way. So why not jump right in? Visit our Beginner Section & let's start this journey together.
-----
Specifications:
- Weight Without Battery: 8.1oz (230g)
- Center Of Gravity: 14" (355mm) from the nose
- Control Surface Throws: 16 degree deflection/ Expo 30% (increase based on skill)
- Wingspan: 24" (609mm)
-----
Recommended Electronics:
- Motor: 2300Kv 2204 size motor
- Prop: 6.45CW Reverse Prop
- ESC: 12 amp minimum
- Battery: 850mAH 3S
- Servos: 2x 5 gram servos
-----
Package Includes:
Note: Kit includes airframe only
- 3) Lasercut Maker Foam Sheet
- 1) Velcro
- 2) 16.5" Pushrod
- 2) BBQ Skewers
- 2) Rubber Band
- 2) Zip Tie
- 1) Mini Firewall/Control Horn Combo
- 1) Bravo Decal Sheet
-----
Step By Step Build Tutorial Of The FT Bravo
*Please watch recent build videos before removing any paper from the foam!*
Related Products
FT Simple Soarer MKR2
The FT Simple Soarer is a great introduction to 2-channel gliding. Whether you are motoring up to altitude by using a Power Pod or towing the Simple Soarer up with a friend by using the FT Elements...
FT A-10 Warthog MKR2
The Flite Test A-10 Warthog is one of the largest and most complete Flite Test kits available. This kit includes all of the lasers cut components, including the firewalls, hardware, pushrods, duct...
FT Flerken MKR2
Its time to expand this iconic airframe to now be offered in our patented FT Maker Foam v.2 as the FT Flerken MKR2. The FT Flerken MKR2 is a combination of the true celebration of form and function...
FT 3D XL MKR2
The newly designed FT 3D XL MKR2 is the perfect entry aircraft into Aerobatics and 3D flight. Inspired from the classic FT 3D, the larger scale, and more capable version, was designed through a...
FT Simple Storch MKR2
The FT Simple Storch is a fun and relaxing flyer for new and experienced pilots alike. It is a 4-channel plane with the options of flaps, flaperons, and even leading edge slats just like the full...
FT Edge 540 MKR2
The FT Edge is based on the Zivko Edge 540 V3, which is one of my personal favorite aerobatic planes and also a very popular choice for pilots competing in the Red Bull Air Races. The FT Edge...