Canadian Dollar
FT Bloody Wonder MKR2
RC Airplane Build Kit
The FT Bloody Wonder RC plane adapts from beginner speeds to blistering vertical takeoffs. Experience thrilling flight with this versatile "Bank And Yank" design.
FT Bloody Wonder MKR2
FT Bloody Wonder MKR2 Specifications
- Weight Without Battery: 11.5 oz (326 grams)
- Center of Gravity: 1.6" (40.5 mm) from leading edge of wing
- Control Surface Throws: 12 degrees deflection Expo 30%
- Wingspan: 28" (711 mm)
Recommended Electronics
- Motor: 2212 or 2218
- Prop: 9x4.5 or 10x4.5
- ESC: FT 25amp XT60 or 40amp
- Battery: 1300-2200mAh 3s or 4s
- Servos: (2) 9 gram servos
Package Includes
Note: Kit includes airframe only. No electronics are included in the kit.- 2) Lasercut Maker Foam Sheet
- 1) Simple Premium Hardware Pack:
- (4) Vinyl Control Horn
- (1) Vinyl/Fiberglass Firewall
- (5) Rubber Band
- (4) Zip Tie
- (1) Velcro
- (1) Paint Stir
- (4) BBQ Skewer
- (6) Popsicle Stick
- (1) Control Rod Housing
- (4) 23" Pushrod
- (2) Medium Landing Gear Wire
- (1) Thin Landing Gear Wire
FT Bloody Wonder MKR2 Videos
-
FT Bloody Wonder
The Bloody Wonder is a fun low effort park flyer that is finely capable at combat like fun! ITs strengths are that its very easy to build, complete one in a short afternoon, fly that day!
The aircraft is fairly stable in level flight, roll is average. Pitch authority is consistent at low and fast speeds. Turn performance is average; the aircraft will not high speed stall on you, but it doesn't have as tight a turn at high speeds.
Buy this plane for a low drama aerobat fun flyer!
Related Products
FT Bloody Baron MKR2
The Bloody Baron is a 4-channel combat/sport plane. Coupled with our Power Pack B, the Bloody Baron can be flown as a 4-channel trainer. Use the Power Pack C and the Bloody Baron will climb...
FT Wonder Glider MKR2 (5 Pack)
The FT Wonder Glider MKR2 is a great introductory build to introduce you to the Flite Test line of DIY airplanes. Its simple design and polyhedral wings allow for the EZ Glider to be built and flown...
FT Bushwacker MKR2
Say hello to Peter's 3rd FT design, the FT Bushwacker! This rugged little plane is based off of multiple popular full scale bush planes such as the Highlander! The FT Bushwacker is an aerobatic super...
FT 3D MKR2
The FT-3D is a great first step into the 3D world. Although it incorporates unconventional features like vortex generators and wing plates, this plane is both simple to build and incredibly durable...
FT Cruiser MKR2
The FT Cruiser is the ninth design in the swappable series. Its gentle stall characteristics and light wing loading make for a relaxed flyer. The Cruiser is also an aircraft that can grow with you...
FT-22 MKR2
The FT-22 is a fun flyer that beginners and advanced pilots can enjoy together. This design was the first of our new Simple Series, which uses the FT Elements Simple Firewall, instead of a power pod...