Horizon Hobby

X-VERT VTOL BNF Basic

$179.99 $149.99
You save: $30.00
Current stock: 0
Description

The X-VERT™ VTOL gives you all the fun and versatility of a Vertical Take Off and Landing aircraft without the need for complex mechanics or fancy programming. It also makes the transition between multirotor and airplane flight as easy as flipping a switch. You can also take your flight experience to a whole different level using the optional and patent-pending FPV camera and servo-driven mechanism that transition automatically when the X-VERT does (FPV gear sold separately).

Sleek and Simple Design

A lot of VTOL aircraft require complex mechanisms like tilting wings and motors to achieve vertical and forward flight. The X-VERT park flyer's simple, tail-sitter design and SAFE® stabilization technology allow it to fly like an airplane or a multirotor using nothing more than differential thrust and its elevons. The simplicity of this design also makes the lightweight, EPO airframe remarkably durable.

Wide, Pilot-Friendly Flight Envelope

The light wing loading and efficient aerodynamics inherent in the aircraft's design play a big role in making it easy to fly, especially in airplane mode. Fast or slow, pilots will enjoy smooth, predictable response at any speed.

SAFE® Flight Control Software Makes it Easy

At the heart of it all is exclusive SAFE (Sensor Assisted Flight Envelope) flight control software that has been expertly tuned so almost any RC pilot can experience the fun of VTOL flight. 

  • Automated Transition
    Making the transition between multirotor and airplane flight is as simple as flipping a switch. The flight controller will automatically transition the aircraft from one to the other using SAFE technology to stabilize everything so you can relax and have fun.
    3 Flight Modes
    The advanced flight control software features three flight modes that, along with the model's light wing loading and efficient aerodynamics, give you a wide range of performance.
    • -   Multirotor Stability Mode
      This mode allows you to take off and land vertically like a multirotor aircraft. It's also great for indoor flight. In this mode the aircraft's tail remains pointed at the ground while the flight controller uses a combination of differential thrust and elevons to control pitch, bank and rotation. Pitch and bank angles are limited, and SAFE technology will work to keep the model in a stable hover whenever you release the sticks.
      -   Airplane Stability Mode
      In this mode the aircraft responds to pitch, roll and yaw commands like a typical airplane. SAFE technology limits pitch and bank angles so new pilots can experience airplane flight without accidentally rolling upside down or losing control. It will also return the wings to level whenever the sticks are released.
      -   Airplane Acro Mode with AS3X® Technology
      In Airplane Acro Mode the model becomes an agile, fully aerobatic flying wing. There are no angle limits or self-leveling. The large, long-throw elevons will allow you to perform incredibly tight turns as well as a wide range of aggressive aerobatic maneuvers. And because you have the forward thrust of two brushless motors working for you, there is plenty of speed and power to spare. You can even use the differential thrust of the motors for yaw control to perform wild spinning and tumbling maneuvers.
  • As you fly, AS3X technology works behind the scenes to smooth out the effects of wind and turbulence. It feels completely natural, too. It won't interfere with or limit your control in any way. You simply enjoy a sense of stability and precision that makes you feel like you're flying a much bigger aircraft.

Customize Your Trim Scheme

The included decal sheet gives you multiple trim scheme themes to choose from - a military theme with bomb and rocket decals, and different sport themes with vibrant colors. You can even personalize your trim scheme by mixing and matching decals from different themes.

FPV Ready

You can also take your flight experience to a whole different level using the optional and patent-pending FPV camera and servo-driven mechanism that transition automatically when the X-VERT does (FPV gear sold separately).

Super-Simple Transmitter Setup

The model comes equipped with a Spektrum receiver that is built into the flight controller. It can be flown with any full-range, 6+ channel DSMX/DSM2 aircraft transmitter. No complex programming or setup is required. All you have to do is assign switches for the flight mode/transition changes and throttle arming.

Key Features

  • Multirotor versatility and sport plane agility
  • Takes off and lands vertically in small areas
  • Fly slow or fast and perform aerobatics in airplane mode
  • Can be hand launched and belly-landed like a conventional wing
  • Simple tail-sitter design and SAFE technology makes VTOL flying easy
  • Stability and Acro modes that provide a wide range of flight performance
  • Optional and patent-pending FPV camera and servo-driven mechanism (sold separately)
  • 280-size brushless motors compatible with 2S 450-800mAh LiPo batteries
  • Outstanding speed and climb performance
  • Lightweight and extremely durable EPO airframe
  • Colorful decal sheet with multiple trim scheme options
  • Ready to fly within minutes of opening the box
  • Propeller guards and vertical fins that are easy to install or remove

Needed to Complete

  • Full-range, 6+ Channel DSMX®/DSM2® transmitter
  • 450-800mAh 2S LiPo flight battery
  • 2S compatible LiPo charger

What's in the box?

  • (1) X-VERT VTOL Airplane
  • (1) 3-in-1 Receiver/ESC/Flight Controller Unit
  • (2) BL280 2600Kv Brushless Outrunner Motor
  • (4) Decal Sheets
  • (1) User Manual

 

Reviews

Reviews (2)

Ed 6th Oct 2017

Mixed thoughts

Servos are super weak and will strip. So make sure you have replacements handy. I've not really looked into replacing with another manufacturer's 4g servos so I'm not sure if you have a better option or not. Also my rx antenna wire appears to have been cold soldered to the flight controller and it broke free during flight leading to a catastrophic crash that split the air frame in two and broke the props and stripped at least one servo and broke the frame in other places. The antenna in newer versions appears to be soldered only on one side of the pcb and the solder doesn't extend through the hole. I suggest people solder their antenna on the exposed side if they aren't already. So other than shoddy soldering causing me to have to glue my plane back to some frankenstein version of itself, it flew and operating just as it was supposed to for the past couple weeks that i've been flying it. FPV has worked fine and I'm using the tilt servo fpv setup and it works as advertised. But it loses 2 stars because of weak servos that need to be replaced more than props and a soldering issue that basically trashed the entire air frame and props.

John Ruggles 17th Sep 2017

servos on x-vert

Servos are very lightweight and srrip very easily. They should be metal gear or dome other material. We have two of them and both have a stripped servo in them.

Specifications

Specifications

SKU:
4054353178