This is the Random Heli T-Track Adjustable Mounting System. Most RC pilots secure their models for transport by mounting Skid Clamps to a board or platform using the supplied screws. That’s fine as long as they can always put the same models in the same place. But what about when the gear you’re carrying interferes with the tail of a heli? Or when a buddy wants to bring along his machines? That’s where Random Heli’s T-Track System comes in.
When combined with the Thumbscrew Pack (RANHDW-ANC-TRK-8), and your favorite Random Heli Gear Clamps, theT-Track System allows you to simply loosen the thumbscrews that fasten the Skid Clamps and slide the Clamps to a new position. Need to change the spacing between helis to accommodate an additional model or two? No problem. Loosen the thumbscrews on the existing Skid Clamps, move them to their new position, then slide in additional Clamps and tighten the thumbscrews. It’s fast, flexible, and it makes using Skid Clamps even more convenient.
The system consists of two components (sold individually): the Rigid PVC T-Track and the thumbscrews and track nuts.The T-Track can be mounted to wood, metal, or plastic using the supplied screws. It can also be mounted to hollow walls (drywall/sheet rock) or masonry walls using anchors you can purchase separately from Random Heli or from others. The thumbscrews have good-looking, easy-to-grip knurled black plastic heads molded onto 8-32 steel threads. The thumbscrews drop right into the mounting holes in ALL Random Heli Skid Clamp bases WITHOUT modification. The oval track nuts are also steel with 8-32 threads. They slide easily into the track and, when tightened, engage firmly with the 'lip' of the T-Track.
Each pack contains two 24" long pieces of T-Track and 12 screws for mounting on wood, plastic, or sheet metal.