RaceTek Smoke Stopper (XT-30)
COVID-19: We ask for your understanding as you may experience delivery delays.
The RDQ Smoke Stopper uses a Resettable fuse (PPTC). Connectors are high quality Amass XT60's.
Connector Type: XT30
Input Voltage: 1-5s capable (24v Max)
Current Rating: 1.1A Hold Current, 2.2A Trip Current
Fuse Reaction Time: 0.5S Trip time
Plug the Solid State Smoke Inhibitor between the battery and the device.
Green led on, OK.
Green led dim or blinking, Fuse tripped.
Green led off, Shorted.
To reset the Solid State Smoke Inhibitor, unplug for 10 seconds.
Note: Solid State Smoke Inhibitor/ Lightbulbs / Fuses / Circuit breakers are not 100% foolproof way of keeping the magic smoke in. It’s always best to use in conjunction with a multimeter. This is NOT an end all be all kind of protection. Nothing is. It is best at protecting against a soldering short. If you wire something wrong, it will likely still blow (ie apply 16v to a 5v system). This is a failsafe, one that will probably help you but may not depending on the kind of error you make. Double check wiring schematics, check your gear with a multimeter, and lastly use a Smoke Stopper. Do not wire things up randomly and hope a Smoke Stopper will save you - that's a bold move Cotton!
This product was added to our catalog on May 22, 2019