FT Sportster WR (990mm)
- 2.00 LBS
FT Sportster WR (990mm)
Our hope is that the FT Sportster will be fun for both the beginner looking to get into four channel flight, and also the advanced looking to reenact all the classic barnstormer maneuvers from the past. This plane does not like to fly alone. Our hope is that this will be a design that friends build and fly together.
The FT Sportster is designed to fly off a 425 size motor. Our C motor coupled with a 2200 3 cell battery gives great performance and a nice flight time. The outer wing tips of the FT sportster are under campared so slow speed and stability are not compromised. This plane is able to turn on a dime and can handle many classic and advanced maneuvers. Remove the landing gear for an easy hand launch or find some smooth grass and do lazy touch and goes.
- WEIGHT WITHOUT BATTERY: .95 lbs (430 g)
- CENTER OF GRAVITY: 2.5” (63 mm) from leading edge of wing
- CONTROL SURFACE THROWS: 12˚ – 16˚ deflection – Expo 30%
- WINGSPAN: 39 inches (990 mm)
- RECOMMENDED MOTOR: Park 425, 1000 kv minimum
- RECOMMENDED PROP: 10 x 4.7 slow fly
- RECOMMENDED ESC: 30 amp minimum
- RECOMMENDED BATTERY: 2200 mAH 3s minimum
- RECOMMENDED SERVOS: (4) 9 gram servos
- Note: Poster Board Is Not Water-Resistant
FT Sportster Build
Please watch recent build videos before removing any paper from the foam! Some videos may use white foam board, which is no longer available and has now been replaced with water-resistant foam board.
This is the 3rd FliteTest model I am building with my son. It seems that the team has improved on building techniques, sturdiness and finish a lot over the various models. The Sportster is- when compared to the Baby Blender and the Spitfire- the most polished design I have seen from FliteTest so far. Great work guys!
As a super newbie to building foamies, but I tinker enough to compensate for lack of experience. The step by step video helped alot. Tremendous thanks to J.Bixler & his love for the hobby. I added construction paper wing tip covers to hide the spars.
I haven't built it yet however the quality of the kit is awesome. I just printed the paint stencil they offer and will paint it. I also use the tac spray on patterns I cut by hand. I can't see any negatives about FT. A great company and group of great folks. Keep up the good work and I'll keep getting in wife trouble HA HA.