null
svg-arrow-next svg-arrow-prev
×

Order online: 1.844.494.7012

sidebar
Zoom the image with the mouse

FT Simple Soarer WR (1460mm)

(5 reviews) Write a Review
$35.99

SKU:
4023625816
UPC:
810043180580
Flying Difficulty:
Beginner
Build Difficulty:
Intermediate

FT Simple Soarer WR (1460mm)

$35.99

The FT Simple Soarer is a great introduction to 2 channel gliding. Whether you are motoring up to altitude by using a Power Pod or towing the Simple Soarer up with a friend by using the FT Elements Simple Tow Release mechanism, this plane is a real performer. 

NOTE: 
Will ship within 3 business days. 
This includes the airframe only (no electronics).
This airframe is compatible with the swappable series developed by Josh Bixler.

  • WEIGHT WITHOUT BATTERY: 11 oz (311 g)
  • CENTER OF GRAVITY: 2.75 inches (70 mm) from leading edge of wing
  • CONTROL SURFACE THROWS: 12 ̊ deflection (elevator/rudder) Expo 25%
  • WINGSPAN: 57.5 inches (1460mm)
  • RECOMMENDED MOTOR: 24g, 1300 kv minimum
  • RECOMMENDED PROP: 9 x 4.7 prop
  • RECOMMENDED ESC: 10 - 18 amp
  • RECOMMENDED BATTERY: 500 mAH 3s
  • RECOMMENDED SERVOS: (2 - 3) 9 gram servos 

 

 

 

 

 

Kit includes:

  • Laser-cut foam airframe
  • Power Pod (Swappable)
  • Firewall
  • Push rods
  • Control horns
  • Bar-BQ Skewers
  • Rubberbands
  • Data Sheet
  • Velcro
  • Coffee Stirrer

 

  • simple soarer
    3

    Posted by Ed Malec on 29th Oct 2021

    A good plane. Easy to build. Can be turned into a very good motor-gliderby trimming the wing's cord, lightening the wing by removing the internal paper, using just one thickness of spar and using a folding prop. Then it can catch thermals.

  • Excellent Trainer
    5

    Posted by JTBluefeather on 3rd Feb 2018

    This builds really easy if you follow the directions. I'm not a glider person, so I put a motor on it, and it performs magnificently! I have often put it up in a gentle breeze and been able to keep it aloft for 30 minutes to an hour just with a little power at a time. With a 3S 2200' I use it as a trainer for my kids and newbie pilots. It is gentle and docile, and forgiving for new pilots. It does need some speed at that weight to keep air moving over the control surfaces, but it teaches them speed management as well. Excellent plane!

  • incomplete nose piece
    3

    Posted by RDF on 6th Jul 2017

    The glider nose came in two pieces; should have been one connected piece. The B folds were not cut; had to make them. Other than that, everything went together well. On the first build, you really need to follow along with the video to not miss important steps. I had already built 2 small FT gliders, so knew what to watch for. Building the simple FT planes is fun and educational for children, i.e., grandkids.

Customers Also Viewed