Flite Test

FT Mighty Mini Vector

Current stock: 0

Welcome the newest plane from Peter "The Mad Scientist" Sripol's laboratory... The FT Mighty Mini Vector!!  This plane has it all!  3D capabilites, agility, speed and most of all a great flying experience!  You can always expect a little "crazy" when it comes to peter's planes, but this one has just the right combination of a little crazy, a smidge of class and a whole lot of FUN!  This plane will also be equiped with Water Resistant Flite Test foam board by Adams.  We are hoping this foam will transcend expectations and bring about a movement to extend the quality and durability of foam airplanes as we know them!  So, Take the FT Mighty Mini Vector for a spin and shoot us a review about your experience!..LETS FLY!! 


  • 1x-Water-Resistant Foam Board Kit by Adams
  • 4x-Control Horns
  • 3x-Pushrods
  • 2x-BBQ Skewers
  • 1x-Mini Firewall
  • 1x-Velcro
  • 1x-Mighty Mini Sticker


  • WEIGHT WITHOUT BATTERY: 7.5 oz (211 g) 
  • CENTER OF GRAVITY 14 inches (355 mm) from the nose
  • CONTROL SURFACE THROWS: 20 ̊ deflection (elevons) Expo 30%
  • WINGSPAN: 25 inches (635 mm)
  • RECOMMENDED MOTOR: 2300 kv 2204 size motor
  • RECOMMENDED PROP: 6 x 4.5 prop
  • RECOMMENDED ESC: 12 amp minimum
  • RECOMMENDED BATTERY: 800 mAH 3s minimum
  • RECOMMENDED SERVOS: (2 – 3) 5 gram servos 


FT Mighty Mini Vector - Build

Please watch recent build videos before removing any paper from the foam! Some videos may use white foam board, which is no longer available and has now been replaced with water-resistant foam board.


Reviews (14)

28th Apr 2016

Bad kit

Poor laser cuts, would like to try the new foam board but will never need 50 sheets

15th Apr 2016

Easy build, but a little learing curve

I would have liked basic assembly instructions, at least a blow up. pausing and starting a video was a pain. I have never built a kit that absolutely everything fit, this was perfect. The build was easy, but it takes a lot of technique to produce a nice looking model. Paint would not stick to the paper, so I had masking pull off. Although ugly it flew as shown in the video. I purchased another, using my new experience, and built another nice looking, nice flying plane that was awesome. I used magnets for the hatch. Purchased the Raptor can't wait to fly it.