The North American Aviation P51 Mustang was an American long range single seat fighter. It proved itself to be economical, fast, well made and highly durable. Power originally came from an Allison but it was much more successful with the mighty Merlin from Rolls Royce.
The Famous models P51 Mustang has been carefully created to give maximum reward to the budding pilot. The aircraft features a brushless motor, 20Amp ESC and 4 ready installed servos. Assembly takes minutes following the simple photo step by step assembly guide.
The EPP construction gives a light yet resilient airframe that will take much punishment and just bounce right back into the air!
Compact, adrenaline fuelled, big packet of fun still doesn't do verbal justice to this airframe, we love it! Dog fights really become genuine fun with this range of aircraft so what are you waiting for.
- Detailed scale features including four blade propeller, hand painted pilot figure, and drop tanks
- Reinforced main landing gear and steerable tail gear
- Landing gear snaps on/off easily to convert plane from runway to belly lander
- Fuel tanks are attached to the wings with a slide mount system (no glue), so they can be easily attached/detracted
- Upgraded FMS proprietary servos
- Upgraded Kv1700 brushless motor - better quality and 30% faster than previous generations
- Improved body design and Center of Gravity (CG) makes this mini easier to control
- Durable EPO Foam
- Wingspan: 31.5 in (800mm)
- Overall Length: 27.2 in (690mm)
- Flying Weight: Approximately 14.8 oz (420g)
- Motor Size: Brushless 2408-Kv1700
- Radio: 4 Channel
- Servos: 4 x 9g servo
- CG (center of gravity): 2.6 in (65mm) from leading edge
- Prop Size: 7.5 x 4, 4-blade propeller with spinner
- Speed Control : 20A Brushless ESC
- Recommended Battery: LiPo 7.4V 1000mAh 15C
- Aileron: Yes
- Elevator: Yes
- Rudder: Yes
- Throttle: Yes
- Flaps: No
- Retracts: No
- Approx. Flying Duration: 6 minutes
- Charger: Sold Separately
- Landing Gear: Yes
- Assembly Time: Less than 1 Hour
This product is expected to become available for purchase on Friday, August 13, 2021
Most of the airplane was put together very well, but when I tried to spin the propeller, it was locked up and the motor rattle around in the cowl.
the cowl cannot be removed and the motor was not screwed to the firewall so it was very difficult to get the Allen wrench through the holes in the side of the fuselage to loosen the motor grub screws. But after an hour we finally had the motor out and could screw the motor mount to the firewall with the screws that were jammed in the motor windings. With the motor mount now properly mounted it was easy to mount the motor in the mount since the grub screws lined up with the holes in the cowl. Fortunately the windings were not damaged by the screws and the motor ran properly.
The model is a good flyer for intermediate pilots. Beginners will find that it loses altitude in the turns very easily if the rudder and elevator input is not balanced with the aileron. It does slow down nicely for Landings, but is kind of squirrelly on take off.