Flite Test FT-22 Speed Build Electric Airplane Kit (635mm)

Flite Test
Power Pack
$62.95 - Flite Test Power Pack B (Fixed Wing Small) (details...)
Crafty Kit
$99.99 - Flite Test Crafty Kit (details...)
$18.99 - Tattu 3S LiPo Battery 75C (11.1V/1300mAh) (details...)
Low Price: $28.00
Back Order Add to Wish List
Out Of Stock Online
You may back order this item and it will ship when it arrives in stock.

Please Log in to receive a notification when this item arrives in stock.

The Flite Test FT-22 is a fun flyer that beginners and advanced pilots can enjoy together. This 2 sheet design is the first of our new Simple Series, which uses the FT Elements Simple Firewall, instead of a power pod. Considering the sleek look of the FT22 and it's excessive elevon control surface throws, the FT22 is actually a very forgiving platform that we would even go as far to say that it would be a great first plane/trainer. This is an excellent introduction to bank and yank style flying. With a smaller motor and battery, this plane could easily be flown indoors in as small as a 2 court gymnasium and with a heavier set up it penetrates well enough to be flown in light to moderate wind.

Power Pack Compatibility:  
Flite Test Airplanes are all designed around the use of various "Power Packs" which include an inexpensive Motor, ESC, Servo, & accessory package to complete each aircraft! The compatible power pack is listed below. 

Weight: 8.3 Oz (Fully assembled; without battery)
Wingspan: 25.5 Inches (635mm)
Center of Gravity: 15.5-16 Inches (394-406mm) from the tip of the nose (Recommended)
Control Surface Throws: 40 degrees
Expo Suggestions: 30%

Kit Includes:

  • Laser-cut Foam Airframe
  • FT Elements Simple Firewall
  • Push Rods
  • Control Horns
  • Specification Sheet

Needed to Complete:

  • (1) Brushless Motor: 1300kV minimum
  • (1+) Propellers: 9x4.7
  • (1) ESC: 15-30 Amp
  • (1+) Battery: 3S 11.1V LiPo 500-1300mAh
  • (2) Servos: ~9 Gram Micro Servos

This product was added to our catalog on August 2, 2017

Daniel Schafer
Average Rating: 5
Saturday, Jan 5 2019 (2 weeks ago)
Flite Test FT-22 Speed Build Electric Airplane Kit (635mm)
Wow! This is such an awesome plane! I tried to learn to fly on the simple cub, but had little success. Every time you crash, you break a propeller, and the $ adds up... I was drawn to this design not only because it looks so awesome, but because of the prop placement. It is in the back, so when you crash (I have many times) you don't break a propeller, which is super awesome. Is crack built this, and it was way easier to cut out of foam then any of the other models, due to its very simple design. The simple design is also makes a very easy and fun building process, and Josh does a great job explaining everything. One thing to take note of is that you'll defiantly need a power pack C to get sufficient power. On a B pack motor with a 30 amp esc running on a 1000mah 3s Lipo, I couldn't gain altitude with full down on the right stick and full throttle. Once I switched to a C pack motor, it flew awesome!! It was really my first successful flight. I really think it is the best beginner plane that flitetest has designed.

I now realize that my lack of power could have been due to the APC prop I was using, and not the reccomended HQ slow fly. Good luck with this plane everyone, and thanks flitetest for another awesome design!