Flight Club

FlightClub Tokio SX Race Frame

$85.00
Choose Your Race Canopy Color
Current stock: 0
Description
FLIGHTCLUB TOKIO SX RACE FRAME

Now shipping with the injection molded canopies!

The Tokio SX is the 220mm stretch X version of the 210mm Tokio X.  Stretch frames are more suited for going fast around a racetrack.  The longer frame makes it more stable on the pitch axis with snappier rolls.  

Designed for ripping around a race track and smashing competition. Prepare to change your perception of race quadcopter frames.  Even though the frame looks simple and minimalistic, look deeper and you will see every millimeter of the FlightClub Tokio frame has been engineered with an obsession to perfection.

PROTECTION

Heavy emphasis was placed on protection and durability.  Less broken parts means maximum flight time. The FPV camera is the most commonly damaged component.  Tokio has three stages of camera protection.  All three are designed to dissipate the shock of impacts.

  1. Thick protruded lip around the lens.  This is designed so the lens sits inside the frame.
  2. Flexible canopy.  Absorbs the shock of impacts.
  3. Bendable bracket that mounts the camera.

An ultra durable Thermoplastic Polyurethane Canopy houses all the delicate electronics.  Unlike a full carbon frame, a flexible canopy can dissipate the shock of impacts.  Carbon fiber is super strong but brittle.  There is zero give.  The impact will either damage the carbon fiber or your delicate onboard electronics.  A semi-flexible canopy is like flying around with a pillow around your electronics. VTX and antenna protection.  The antenna has been engineered to slope down below the propellers and not touch the ground.  If the frame lands upside down the antenna never touches the ground or propellers. Built in motor guards.  The shape of the carbon fiber around the motors is design to protect the motors.  Simple and effective design.

INNOVATION

Introducing Butter Mount.  An innovative new way of mounting the flight controller stack.  The Butter Mounts are designed in a way the mounting screws never touch the carbon fiber frame.  Motors, unbalanced props or damaged props can transmit noise to the flight controller in the form of vibrations.  These micro vibrations can cause erratic flight behaviors, oscillations and in extreme cases burn out motors and ESCs.  Butter Mounts will greatly reduce if not eliminated flight controller vibration issues. Simple but smart way of mounting the canopy.  Only requires two screws to mount the canopy on the carbon fiber frame.  Makes it really easy to build or do field repairs.  Less hardware equals savings in weight.  Once mounted the canopy is guaranteed to not come off.

ATTENTION TO DETAILS
  • Fully chamfered outside edges
  • Completely flat bottom with countersunk screws.  Prevents the battery from getting shredded by protruding screw heads.
  • Hypotensed Carbon fiber.  The frames are rotated 45 degree so the carbon fiber strands run down the arms
  • Antenna ports slightly below the top of the canopy to minimize damage
  • Easy access to change VTX channels
  • USB ports on sides of canopy
  • Camera angle lock (if used with the FOXEER Arrow or RunCam Swift)
  • Easy to swap battery strap
SPEED

Great care was put into designing the shape of Tokio.  From the areodynamic canopy to the shape of the carbon fiber frame, we tried to minimize air drag by reducing the surface area in the Z  (vertical) and X (horizontal) axis.

SPECIFICATIONS
  • 220mm Stretch X frame
  • 4mm fully chamfered hypotense bottom plate with countersink holes
  • Thermoplastic Polyurethane Canopy
  • Weight 105g
INCLUDES
  • 4mm Stretch X Carbon fiber hypotense and outer edge chamfered bottom plate
  • Ultra durable Injection Molded Semi Flexible Thermoplastic Polyurethane (TPU) Canopy
  • 1.5mm carbon fiber battery plate
  • 1.5mm VTX plate
  • Canopy mounting hardware
  • 4 - Butter Mounts
  • 4 - M3x12 Button head hex screws
  • 8 - Nylon M3 hex nuts
  • 4 - M3x8 Nylon standoffs
  • 3 - M3x8 Flat head hex screws (1 spare)
  • 2 - Antenna tubes
  • 2 - Antenna Caps
  • 1 - FlightClub velcro strap
  • Stickers!

The base Tokio SX frame kit comes with the standard race canopy. 

 

Build Tips

  • Designed for a 2 or 3 flight controller stack.  A PDB, 4in1 ESC and flight controller can be used.
  • Maximum height for the stack is 24mm
  • Depending on the stack height, you can use X4R-sb, XSR (recommended), XM Plus, XM or Spektrum equivalent.
  • Needs to use micro video transmitters such as the TBS Unify Pro series or any other VTX in this size.
  • Designed for the RunCam Swift or Swift 2 or Foxeer Arrow V3
WHY YOU SHOULD GET THE FLIGHTCLUB TOKIO SX

Tokio is perfectly suited for beginners looking for their first quad or a full fledged screaming race quad. Why it's suited for beginners:

  • Every component is fully protected (camera, motors, VTX, flight controller)
  • Easy to build.
  • Fully adjustable camera with angle lock (if used with the Foxeer Arrow or RunCam Swift)
  • Lightweight and strong

Why it's suited for a Race Quad

  • Protection
  • Easy to change VTX channel
  • Fully adjustable camera with angle lock (if used with the Foxeer Arrow or RunCam Swift)
  • Only need to remove two screws to access the entire quad inside.  Makes field repairs quick and painless.
  • Lightweight and strong
  • Stretch X corners like on rails
Reviews

Reviews (0)

Be the first to review this product.
Specifications

Specifications