EMAX Bullet Series 30A Dshot ESC w/BLHeli_S

EMAX Bullet Series 30A Dshot ESC w/BLHeli_S
In Stock Online
Usually ships in 24 hours
$2.99 flat rate shipping! Learn More
Read Reviews
Write a Review

The EMAX Bullet Series of ESC's offer an excellent array of features that have became high in demand. The first clear feature is their physical size compared to competitors, forget the previous "small" ESC's within each amperage class because EMAX has shrunk the size down substantially. The BLHeli_S Firmware equipped on the Bullet ESC's also now support DSHOT*** and also Multishot, and OneShot protocols. Additionally the built in heat sink provides both lower overall core temperature and impact resistance against propeller strikes.

NOTE***: The Bullet 35A does not directly support DSHOT out of the package.


  • BLHeli_S Firmware
  • DSHOT/MultiShot/OneShot Support
  • MOSFETS sourced from Toshiba Japan
  • Murata Ceramic Capacitors
  • 3oz High-TG PCB Board

Input Voltage: 2 -4 cells, 2S-4S LiPo
Constant Current: 30 Amps
Burst Current: 35 Amps
Weight: 5g w/ wires, 4g bare board (wires removed)
Dimensions: 12x20x5.5mm (board dimensions only)
Battery Wire: 18awg
Throttle Wire: 105mm
BEC: None

Saturday, Dec 29 2018 (about 2 years ago)
EMAX Bullet Series 30A Dshot ESC w/BLHeli_S
The esc’s are very small and burn very easily. I was at the end of a 3:40 flight and one caught on fire. I suggest getting the EMAX formula 45 amp. I was using them with the Emax rs 2205 2300kv motors with 5.1x4x3v1s props