For visually impaired users: Browse the streamlined version of our website.

DLE Engines DLE-61cc Gas Engine w/Electronic Ignition

Note: Manufacturer does not allow using discount coupons
Low Price: $449.99
 
Add To Cart Add to Wish List
In Stock Online!
Usually ships in 24 hours
FREE Shipping Eligible!
This item is eligible for Super Saver Shipping Learn More
The DLE Engines DLE-61cc Gas Engine with Electronic Ignition is updated with features such as magnesium alloy crankcases, improved crankshaft bearings, and a better piston/cylinder fit to the engines. he DLE-61 weighs four pounds and cranks out over six horsepower from a durable and long-lasting engine. Extras like an airplane-specific carburetor, muffler, standoffs and electronic ignition boost performance even further. 

Features:
  • Efficient, light design for high power-to-weight ratio
  • Light piston for fast acceleration, excellent compression and low vibration
  • CNC-machined parts for high performance and long life
  • Enlarged crankshaft bearings
  • Two petal reed valve
  • Muffler included for optimized power
  • Spark plugs
  • Spiral wire wrap
Specifications:
Displacement: 3.7 cu in (61.0 cc)
Bore: 1.85" (47mm)
Stroke: 1.38" (35mm)
Compression Ratio: 10.5:1
Performance: 6 HP/7,500RPM
Idle Speed: 1,400 RPM
Overall Weight: 4 lbs (1814g)
Engine Weight: 3.02lbs (1370g)
Muffler Weight: 3.9oz (110g)
Ignition Module Weight: 3.9oz (110g)
Engine Mount Standoff Weight: 4.5oz (128g)
Distance between top Horizontal Mounting Hole Centers: 3.54" (90mm)
Distance between Vertical Mounting Hole Centers: 2.64" (67mm)
Distance/bottom Horizontal Mounting Hole Centers: 2.83" (72mm)
Height/Crankshaft center to top of Cylinder Head: 4.96" (126mm)
Backplate to outer edge of Prop Drive Hub: 6.77" (172mm)
Outer edge of Standoff to outer edge of Prop Drive Hub: 9.45" (240mm)
Standoff Length: 2.68" (68mm)
Spark Plug Gap: 0.018 - 0.020" (0.45mm - 0.51mm)

 

Carburetor Settings: (Carb is preset at factory and should require only small adjustments)
  • Idle Adjustment Screw: Turn clockwise to increase idle speed, counterclockwise to decrease idle speed
  • Low Speed Needle: Turn needle to fully closed position, then open 1.25 turns
  • High Speed Needle: Turn needle to fully closed position, then open 1.5 turns-tachometer is recommended when setting high speed needle to obtain maximum speed

Includes:
  • DLE-61 Gasoline Engine with Electronic Ignition, NGK CM6 Spark Plug
  • Electronic Ignition, Muffler, four 2.7" (68mm) Standoffs
  • Instruction Manual
Needed to Complete:
  • 87 octane gasoline
  • 2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance
  • 4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition (separate receiver style pack can be used)
  • Propeller: 22x10, 23x8, 23x10, 24x8
  • Field Equipment
  • Note: 1st version ignition is marked 'A-01' on the label and requires a regulator if using 2S LiPo/LiFe battery If ignition module is the A-02 model it has a built-in voltage regulator. Model A-02 designation is located above the word "Ignition" on top of the case

This product was added to our catalog on October 8, 2019