Bloody Baron Speed Build Kit

$33.00 $28.00
You save: $5.00
Current stock: 0

The Bloody Baron is a four channel combat / sport plane. Coupled with our Power Pack B, the Bloody Baron can be flown as a 4 channel trainer. Use the Power Pack C and the Bloody Baron will climb vertically with ease and is capable of most basic aerobatics.

The Bloody Baron is our first community release! That means a Flite Test community member was inspired by experiencing flight enough to design their very own airplane. 

Here is an excert from the designer, Dan Sponholz:

The FT Bloody Wonder was the plane I learned to fly on. It was not my first plane, but it was the first plane I had success with. For that reason it will always be special to me. I can't think of a better way to honor that than by trying to make an already great design even better.  The Baron was inspired by the FT Bloody Wonder.  I think you will agree that the end result is a combat plane that is stronger, yet simpler and faster to construct than it’s predecessor.  I took some styling cues from the classic Das Ugly Stick, and the Fokker Dr.1.  The Fokker Dr.1 was made famous by German WWI ace Baron Von Richthofen (a.k.a. the Red Baron).  Hence the name, Bloody Baron.

This includes the airframe only (no electronics).
This airframe is compatible with the swappable series developed by Josh Bixler.


  • WEIGHT WITHOUT BATTERY: 10.7 oz (303 g)
  • CENTER OF GRAVITY: 2.5 inches (63 mm) from leading edge of wing
  • CONTROL SURFACE THROWS: 12 ̊ deflection (aileron/elevator/rudder) Expo 30%
  • WINGSPAN: 29 inches (737 mm)
  • RECOMMENDED MOTOR: 39 g, 1200 kv minimum
  • RECOMMENDED PROP: 8 x 4.5 slow fly
  • RECOMMENDED ESC: 20 - 30 amp
  • RECOMMENDED BATTERY: 800 mAH 3s minimum
  • RECOMMENDED SERVOS: (2-3) 9 gram servos 


Kit Includes: 

  • Laser-cut foam airframe
  • Power Pod (Swappable)
  • Firewall
  • Push rods
  • Control horns
  • Velcro
  • Bar-BQ Skewers
  • Rubberbands
  • Data Sheet
  • Throw Gauge


Bloody Baron Build

Please watch recent build videos before removing any paper from the foam! Some videos may use white foam board, which is no longer available and has now been replaced with water-resistant foam board.



Reviews (21)

D Holland jr 12th Mar 2017

I not put it together yet

Instead, I downloaded your plans bloody wonders. And I'm having a lot of fun with that I'm saving bloody Baron it for the big day.

Don 28th Aug 2016

Great plane! From build to flight.

Excellent design, I used the 1100kv motor and sent it up for the maiden flight. There are no cons to this plane. All fun, coming from sailplanes and trainers right to this with no problems at all. Used the 9x6 prop offered plenty of speed. I used the water resistant board a little tricky to paint but looks great. Also put the 2250 battery on the inside of the power pod. Thanks I will be building the spitfire next.



2.00 LBS
Calculated at Checkout
Flying Difficulty:
Build Difficulty: