For visually impaired users: Browse the streamlined version of our website.

BetaFPV Toothpick F4 2-4s Brushless Flight Controller

BFPV-00313596
Low Price: $44.99
Add To Cart Add to Wish List
In Stock Online!
Usually ships in 24 hours
The BetaFPV 12A 2-4S F4 AIO Flight Controller w/BLHeli_S ESC software is customized for toothpick style Drones. With real holes, side-mount USB and all solder pads of the edge of the FC, these small features greatly reduce installation time and improving ease of self-assembly. The weight saving of the all in one board makes this ideal for tight builds - using the included Anti-vibration rubber dampers for mini stack height.

Features:
  • Updated layout with whoop mounting pattern, designed real holes instead of notches, customized for Toothpick Drone
  • Adopt USB side-mount, easy to plug in
  • All of solder pads are at the edge of FC, which is a convenience to solder
  • Double-sided motor solder pad. Pins pad and wires pad are both built-in for motors connection
  • Integrated with a Betaflight MATEKF411RX processor FC, Betaflight OSD and 2-4S 12A ESC, support 4S battery for fast-flying experience
Recommended Battery & Motor Selection:
  • 2s Battery:
    • Motor Choice: 1103 11,000kV / 0802 12,000kV / 08028 12,000kV
  • 3s Battery:
    • Motor Choice: 1103 8,000kV / 1105 6,000kV
  • 4s Battery:
    • Motor Choice: 1105 5,000kV

Flight Controller Specifications:
CPU: STM32F411CEU6 (100MHZ)
Six-Axis: MPU6000 (SPI connection)
Size: 32.5*32.5mm (26.5mm mounting holes)
Firmware version: Betaflight MATEKF411 (MK41)
OSD: Build-in BetaFlight OSD (OSD chip: AT7456E)
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver. 
LED Support: Support programmable LED like WS2812 etc
Current Sensor: Built-in current sensor
Weight: 6.2g(Without Pins), 6.5g(Pins Pre-solder)

ESC Specifications:
Passthrough Support: Support BLheli/BLHELI_S suite Pass-through ready
Protocol Support: Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-4S Lipo
Continue current: 12A
Peak current: 15A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G-C
Motor Connectors: 1.25mm header pins connector
Factory firmware: G-H-30-16.7

What's in the Box:
  • (1) Toothpick F4 2-4S AIO brushless flight controller
  • (1) Cable Pigtail (XT-30)
  • (4) M2x10mm screws
  • (4) M2 nuts 
  • (4) Anti-vibration rubber dampers
  • (4) Motor Pluggable Pins (IF NOT Pre-solder)

This product was added to our catalog on October 29, 2019